Hyundai H-CD7002 - Manual (Page 14)

14
· Intro Playing Mode
At stop state (with power on), press MODE button two times, then press PLAY/PAUSE button and unit
will play in INTRO mode: play every song s first 10 seconds (In MP3 playing, this function is disable). At this
time press PLAY/PAUSE button again to resume normal playing.
· Programmed Playing Mode
At stop state (with power on), press MODE button three times and the unit enter PROG PLAYING MODE .
Select songs you are going to play by pressing PREV or NEXT button, press MODE button to confirm,
after all songs that you want to play have been selected, press PLAY/PAUSE button to start PROG playing. If
Playing VCD, you can select songs by pressing digital keys on Remote control, then press PLAY/PAUSE
button for begin to play in PROG (Note: When playing MP3, press ESP button to turn over to the next table
of content for PROG playing).
· Video System Select
When Playing VCD, press ESP button for 3 seconds to switch video system: PAL
NTSC.
· Audio Mode Select
Pressing the EQ button repeatedly will cycle the unit through the following mode: STANDARD
CLASSICALITY ROCK AND ROLL JAZZ POPULARITY STANDARD, it is corresponding to EQ
off to EQ4 showing on LCD (At CD Playing with anti-shock on, the audio mode is disable).
· Video Output On/Off