Hyundai H-CD7002 - Manual (Page 20)

20
18. P/N
Press for selection the video output mode between PAL
NTSC.
19. Power off:
This product turn the power off automatically if the following occur:
- At stop state with no button pressed over 10 seconds or
- The upper cover has been opened over 4 seconds or
- At stop state, press STOP button again.
20. Change battery
(As shown on right figure)
- Press the point along the arrow and pull out the battery tray at the same time;
- Place a new battery on the battery tray with the right polarity (The right polarity
and are marked
on the battery tray).
- Push the battery tray in the battery compartment.
Notes:
· Some functions of Remote control can be used only in playing VCD
· Before using remote control, please pull out the BATTERY PROTECTOR.