Casablanca Fan Company Bellatm Bella Ceiling Fan - Manual (Page 7)

6 6
CANOPY HATCH INSTALLATION
Step 5. Tuck the wires into the canopy
with the wire nuts pointed upwards, so
that the WHITE and BLACK wires are on
opposite sides of the canopy and all wires
are clear of the canopy opening.
Step 6. Install canopy hatch with the last
canopy screw and lock washer. To do this,
tilt the fan body away from the hatch
opening.
Tighten the screws firmly by hand only, TILT THE
FAN TO
INSTALL
LAST
CANOPY
SCREW
CANOPY
HATCH
CANOPY
SCREW
LOCK
WASHER
Step 7. Straighten the fan, then check
to ensure that there is no movement be-
tween the canopy and ceiling or Hang-Tru
ball and top support shaft.
Step 8. Attach the blades to the blade
holders by first pressing the blade badge
into the blade, then installing the blade
holder using the four blade screws and
flat washers provided for each blade.
Using the screwdriver, tighten securely
by hand only.
Repeat for each blade assembly.
BLADE SCREW
(4 PER BLADE)
BLADE
BLADE
HOLDER
BLADE BADGE INSTALLATION
BLADE SCREW
(4 PER BLADE)
BLADE & BLADE HOLDER HARDWARE
BLADE
HOLDER
BLADE HOLDER
SCREW
(2 PER BLADE)
BLADE
BADGE
BLADE
BADGE
Step 9. Remove the blade access plate
next to the light fixture. Set aside the
two screws and the plate—they will be
reinstalled later.
BLADE ACCESS PLATE REMOVAL
BLADE ACCESS
PLATE
LIGHT
FIXTURE