CREATIVE Digital DTT 3500 - Manual (Page 9)

5
Dolby Digital source
Connect the Dolby Digital/SPDIF
output of your signal source to the
Decoder Amplifier’s Dolby Digital (AC-
3) / PCM Audio Inputs COAXIAL or
OPTICAL jack using the SPDIF Cable
(RCA to RCA) or the Optical Cable.
Game consoles
Connect the optical output of the
game console (e.g. PlayStation2) to
the OPTICAL input with the Optical
Cable.
Use the Stereo to Dual RCA Cable
and the Dual Female-to-Female RCA
Adapter to connect to the game
console’s RCA output through the
multiple A/V plug. Then connect the
miniplug end of the Stereo to Dual
RCA Cable to the FRONT jack of the
Decoder Amplifier.
For devices with optical output
Connect the optical output of these
devices (e.g. CD or MD players) to the
OPTICAL input with the Optical
Cable.
For Sound Blaster Live! sound
cards with Digital Out output
Connect the sound card’s Digital Out
output to the Digital DIN input with
the Minijack to DIN Cable and the
SPDIF DIN Cable.
For DIN Bracket bundled with
Live! Drive IR
Connect its Digital DIN output to the
DIGITAL DIN input with the SPDIF
DIN Cable.
For all other sound cards
Use the Tandem Audio Cable.
Connect the lime-green stereo
miniplugs to the Line Out minijack
output of your sound card and to the
FRONT minijack input of the Decoder
Amplifier. Connect the black stereo
miniplugs to the Rear Out minijack
output of your sound card (if present)
and to the Rear minijack input of the
Decoder Amplifier.
Signal Source Connections