CREATIVE WIRELESS RECEIVER SB1122 - Manual (Page 9)

Manual Pairing 8
Manual Pairing
This section shows you how to pair your transmitter manually with two to four
receivers. If you wish to use zone control, you must pair your units manually.
For more information about broadcasting and zone control, see “Using Your
Wireless Features” on page 11.
Only the first four manually paired receivers will be assigned to a wireless
zone. Each manually paired receiver will be assigned to the next available zone.
Step 1: Press the Connect button on your transmitter
With your transmitter and receivers turned on, press the Connect button on
your transmitter. Alternatively, you can click the Connect button in the
transmitter software installed. The transmitter’s Link LED flashes.
CONNECT
P O W E R
C O N N E C T P O W E R
CONNECT
P O W E R
OR
CONNECT
Sound Blaster
X-Fi Notebook
Sound Blaster
Wireless
Transmitter