CyberData 010861 930106A - Manual (Page 26)

CyberData Corporation 930106A VoIP Loudspeaker Amplifier Operations Guide
Installing the VoIP Loudspeaker Amplifier 20
2. On the SIP Setup page, enter values for the parameters indicated in Table 2-11 .
3. After changing the parameters, click Save Settings.
Table 2-11. SIP Setup Parameters
Web Page Item Description
SIP Server* Enter the SIP server represented as either a numeric IP
address in dotted decimal notation or the fully qualified
host name (FQHN) up to 64 characters.
Remote SIP Port* Enter the Remote SIP Port number (default is 5060).
Local SIP Port* Enter the Local SIP Port number (default is 5060).
SIP User ID* Enter the SIP User ID (up to 30 alphanumeric characters).
Authenticate ID* Enter the Authenticate ID (up to 30 alphanumeric
characters).
Authenticate Password* Enter the Authenticate Password (up to 30 alphanumeric
characters).
SIP Registration* Enable/Disable SIP Registration.
Unregister on Reboot* • Select Yes to automatically unregister the paging
amplifier when it is rebooted.
• Select No to keep the paging amplifier registered when it
is rebooted.
Register Expiration* Enter the SIP Registration lease time in minutes (default is
60 minutes).
Click on this button to save your configuration settings.
Changing a parameter that has an asterisk next to it will
cause a system reboot when saved.
Link to the Speaker Setup page.
Link to the Network Setup page.
Link to the Upgrade Firmware page.
Link to the Home page.