Creative Labs Creative Soundworks 500DAB User Manual

Page 19

Advertising
background image

Using Basic Functions 4-3

4. Press the TUNING knob to go to the hours section. A display similar to Figure 4-4 appears.

The current time is shown on the left of the LCD. The hour section of your alarm time
flashes.

5. Repeat step 2.

6. Press the TUNING knob to go to the Alarm Type submenu.

7. Turn the TUNING knob to select BEEP or RADIO*.

8. Press the TUNING knob to confirm the selection.

The display similar to Figure 4-5 shows that the alarm has been activated.

• When the alarm is activated, an asterisk (*) appears on the display when the radio is broadcasting or in

Standby mode.

• * RADIO works only in Standby mode.

Figure 4-4

Figure 4-5

Figure 4-6

Standby mode

Broadcast mode

Nemo UG.book Page 3 Monday, April 25, 2005 10:05 AM

Advertising