Creative Labs Creative Soundworks 500DAB - Manual (Page 22)

4-6 Using Basic Functions
The software version may vary.
Using the AUX IN
jack Use the 3.5 mm stereo-to-stereo cable provided to connect an external device, like your CD or
MP3 player to the AUX IN jack on your radio. See “Your DAB/FM Radio” on page 1-1.
After connecting the external audio device, a display similar to Figure 4-12 appears. Radio
broadcasts are disabled until the external device is disconnected from your radio. To listen to a
radio station, disconnect the external audio device from your radio.
To increase the radio volume, you may need to adjust the volume on your external audio device.
Figure 4-12
Nemo UG.book Page 6 Monday, April 25, 2005 10:05 AM