Cuisinart CBT-500 - Manual (Page 4)

4
FEATURES AND BENEFITS
1. Cover
Just press on. Tightfitting
seal resists leakage.
2. Measured Pour Lid
Allows you to measure
and add ingredients with-
out removing the cover.
3. 50-oz. Glass Jar
Has a unique, sturdy,
widemouth design.
4. Leak-proof Rubber
Gasket (not shown)
Holds the glass jar snugly
in position for safe
operation.
5. High-quality Cutting
Assembly with Patented
Stainless Steel Blades
Is strong enough for all
blender tasks, including
tough jobs, from ice
crushing to chopping
delicate herbs.
6. Locking Ring
Is self-aligning so that the glass blender jar slides easily
into position.
7. Count-Up ™ Timer
Five-minute timer times your recipes for perfect results.
8. Push-button Controls
a. High and Low Buttons
Choose High or Low speed to blend the ingredients to the
desired consistency. Red LED lights will indicate which
speed you are using.
b. Pulse Button
Allows you to pulse at High or Low speeds, so you can
blend ingredients only as much as needed.
c. Ice Crush Button
Press on and begin crushing. This button is preset to the
best speed for crushing ice.
9. Heavy-duty Motor Base
Is so sturdy and stable, it will not “walk” on your counter –
even during ice crushing!
10. Slip-proof Feet
Prevent movement during use and prevent damaging marks
on countertops or tables.
11. Cord Storage (not shown)
Keeps countertop safe and neat by conveniently storing
excess cord.
USE AND CARE
ASSEMBLY
To use your Cuisinart
® SmartPower
Premier ™ 600-Watt Blender, begin by
assembling the blender jar.
1.
Turn the blender jar (a) upside
down, and place it flat on a
sturdy surface.
2. Position the rubber gasket (b)
on the round opening on the
bottom of the blender jar.
3. Turn the cutting assembly (c)
upside down, and place the
blade end in the blender jar
opening.
Note: Blades are sharp…
handle carefully.
4. Secure the rubber gasket and cutting assembly into position
by placing the smaller opening of the locking ring (d) on top of
the cutting assembly. Engage threads by twisting the locking
ring clockwise until tightened. Make sure locking ring is tightly
fastened to blender jar. Once assembled, turn the blender jar
right-side up.
5. Push the cover onto the top of the blender jar. Push the meas-
ured pour lid into the cover.
6. Place the blender jar on the motor base so that the jar mark-
ings are facing you and the handle is positioned to one side.
7. Plug in power cord. Your blender is now ready to be used.
1.
2.
3.
5.
6.
7.
8.
8c.
10.
8b.
8a.
Note: Blades are sharp...
handle carefully.
9.
(d)
(a)
(b)
(c)