ClearSounds CL600 User Manual
Page 15
15
To program your one-touch memory dial buttons please follow instructions below:
1. Lift the handset.
2. Press
the
PROG (program) button
(See diagram #16).
3. Using the keypad, dial the number you would like to save, including “1” and the area
code (if applicable).
(See diagram #17)
.
4. Press one of the Priority or Memory Dial buttons (M1 – M6) located on top of the
phone
(See diagram #18)
. Each button can be programmed (or reprogrammed using
the same procedure) for a phone number.
5. The Caller ID Screen will display <<SAVE OK>>
(See diagram #19).
6. To register your stored phone numbers, use the phonebook insert card located
under the base.
NOTE: Numbers will be lost if the phone is not receiving any power, either through the
phone line, batteries, AC adapter during a storm, power outage or if you disconnect the
phone. Entering a new number in the same location will automatically erase the previous
number.
If at any time you have questions about your telephone please contact our ClearSounds
Customer Service Department at: 1-800-965-9043.
DIAGRAM #19
LCD Display
DIAGRAM #16
Program Button
DIAGRAM #18
Memory / Priority Buttons
DIAGRAM #17
Telephone Keypad