ClearSounds CL600 User Manual
Page 19
19
IMPORTANT: This feature will not work with answering machines or voice mail services.
All answering machine or systems connected to the same phone number as your CL600
must be unplugged.
Activate the Remote Audio Monitoring Feature
In the hook position,
1. Press
the
MUTE button.
2. Using the
or
arrow buttons, highlight <<SET SOS>>.
3. Press
the
OK button to confirm.
4. Using the
or
arrow buttons, scroll to select <<AUTO TURN>>.
5. Press
the
OK button.
6. Using the arrow buttons select << ON>> (“OFF” to deactivate).
7. Press
the
OK button.
8. Press
the
C button twice (2) times to exit.
Setting/Modifying Remote Audio Monitoring Access PIN Code
This feature sets the speakerphone to identify the selected number for Remote Audio
Monitoring. The Access PIN code is factory preset to the sequence 1234. If you wish to
modify it, follow these steps:
In the hook position,
1. Press
the
MUTE button.
2. Using the
or
arrow buttons, highlight <<SET SOS>>.
3. Press
the
OK button to confirm.
4. Using the
or
arrow buttons scroll to select <<PIN CODE>>.
5. Press
the
OK button.
6. Use
the
C button to delete preset digits.
7. Enter your new code (max 4 digits) and press the OK button.
8. Press
the
C button twice (2) times to exit.
Using the Remote Audio Monitoring Feature
The following instructions are for someone to call you, the CL600 Emergency Connect
user, to call back after responding to your initial emergency call or in case they did not
hear from you as expected. Please give a copy of these important instructions to the
appropriate persons for quick reference.
1. Provide your selected callers with a Caller PIN code.
2. Dial as you would a regular phone call. You will hear a “beep” after 10 dialing
tones.
3. You will have 10 seconds to enter the Remote Audio Monitor Access PIN Code
on your keypad (the access code is 1234 unless it has been changed). This turns
on the speakerphone of the CL600 phone and allows you to listen in and have a
two-way conversation.
4. Every two (2) minutes, you will hear another “beep” and will need to press any of the
0-9 keys to continue; otherwise the CL600 will hang up.