Cambridge Audio DVD55RWi - Manual (Page 42)

Select the proper value by usingthe [ ], [ ] buttons, then press the [SELECT] button.
Press the [RETURN] button to return to the previous menu and proceed with any other settings.
Select the "Analogue audio output" item by the [ ],
[ ] buttons, then press the [SELECT] button. A
pop-up list will appear:
Select the desired value by using the [ ], [ ]
buttons then press the [SELECT] button.
Press the [RETURN] button to return to
the previous menu.
TV aspect ratio
Rating level
Pan Scan
OFF
RAW Digital audio output
Playback Setup
OFF Closed captions
RAW
LP CM
GNRL PLAY REC LANG TUNER CLOCK
TV aspect ratio
Rating level
Pan Scan
OFF
RAW Digital audio output
Playback Setup
OFF Closed captions
RAW
LP CM
GNRL PLAY REC LANG TUNER CLOCK PLAY REC LANG TUNER CLOCK PLAY
New Password
Cancel
OK
New password
Confirm password
5.1CH Analog audio output
TV aspect ratio
Rating level
Pan Scan
OFF
RAW Digital audio output
Playback Setup
Closed captions
2CH
GNRL PLAY REC LANG TUNER CLOCK
TV aspect ratio
Rating level
Pan Scan
OFF
RAW Digital audio output
Playback Setup
OFF Closed captions
RAW
LP CM
GNRL REC LANG TUNER CLOCK
New Password
Cancel
OK
New password
Confirm password
5.1CH Analog audio output
TV aspect ratio
Rating level
Pan Scan
OFF
RAW Digital audio output
Playback Setup
Closed captions
2CH
GNRL PLAY REC LANG TUNER CLOCK GNRL PLAY REC LANG TUNER CLOCK PLAY
5.1CH Analogue audio output
OFF
5.1CH
Rating Level setup (continued)
SYSTEM SETUP
DVD55RWi
To change the password, please highlight the “New” in the above figure below, then press the [SELECT] button. The TV screen
will display.
Select the “New password” by using the cursor buttons then input the new password with the numerical keys.
Select “Confirm password” by using the cursor buttons and input this password again with the numerical keys.
The ‘New password’ must be re-entered within the ‘Confirm password’ window.
Highlight the “ok” by using the cursor buttons, then press the [SELECT] button.
After setting the rating level, playing a disc with a rating level higher than what you have set, you must input the password.
If you forgot the password, you may input the super password.
If you forget the password, you may enter the default password.
This unit has digital audio outpack jacks. So you can enjoy the higher quality audio with an amplifier with digital audio decoders.
Digital Audio Output Setup
Access the playback setup menu. Select the item “Digital audio output” by using the [ ],[ ] buttons, then press the [SELECT]
button. A pop-up menu will appear:
Analogue Audio Output Setup
This is used to select an analog audio output format between the 2 channel analogue audio output and the Dolby 5.1 Channel
analogue output.
40.