Dvd55rwi, System setup, Modify channel information – Cambridge Audio DVD55RWi User Manual

Page 47: Auto scan channels channel tuning

Advertising
background image

This operation can tune the unit automatically to receive TV programs.

Highlight the item "TUNER" in the System Setup Control Bar.

GNRL

PLAY

REC

LANG

TUNER

CLOCK

GNRL

PLAY

REC

LANG

TUNER

CLOCK

GNRL

PLAY

REC

LANG

TUNER

CLOCK

TUNER

GNRL

PLAY

REC

LANG

CLOCK

TUNER

Press the [SELECT] button and the TUNER menu will pop up, as shown in the following figure.

Highlight the item "Auto scan channels” and press the [SELECT], button to start channel scanning.

Modify Channel Information

Highlight the item "Modify channel information"

in the "TUNER" menu, and press the [SELECT]

button, the "Channel Edit" menu will pop up

as shown in the opposite illustration:

Select the desired channel to be modified by pressing the [CH+] / [CH-] button.

GNRL

PLAY

REC

LANG

TUNER

CLOCK

GNRL

PLAY

REC

LANG

TUNER

CLOCK

GNRL

PLAY

REC

LANG

TUNER

CLOCK

TUNER

TUNER

Auto scan channels:

SCAN

Modify channel information

EDIT

Sort channel order

SORT

Start auto scan channel.

Tuner audio channel

Channel A

Channel Edit

Channel No. & name

Frequency

Tvsystem

SELECT to modify, CH+/CH- to shift channel,0~9 to jump channel

Nicam

Skip

Fine tune

P089/CH089

46.25MHz

PAL I

Yes

OK

On

Note:

Auto Scan channels

Channel Tuning

SYSTEM SETUP

DVD55RWi

This unit is equipped with a TV tuner, by which you can receive TV signals. Before receiving TV signals, you must proceed with the

tuning operation. The result of the operation will be saved and will not be lost after the unit is switched off.

You can press the [STOP] button to stop the

scanning during the operation. The channel

information having been obtained during the

scannng can also be saved.

Before the channel scan operation , you must connect the system properly to ensure the TV signals can enter the system

through the “TV TUNER input” . Please refer to “System connection-System Connection of recording external signals” for the

connection illustration.

Here, you can name the channel after the corresponding program’s name or any other name you like, sort the channel order to

access the special channel easily, fine tune the channel and manual scan for channels.

45.

Advertising