COOLPIX by Nikon S100 - Manual (Page 147)

E 39
Connecting the Camera to a Printer
Refere
nce S
e
ct
io
n
Connecting the Camera to a Printer
1
Close the slide cover to turn off the camera.
2
Turn on the printer.
• Check printer settings.
3
Connect the camera to the printer using the included USB cable.
• Be sure that plugs are properly oriented. Do not attempt to insert plugs at an angle,
and do not use force when connecting or disconnecting the plugs.
4
The camera is automatically turned on.
• When properly connected, the PictBridge startup
screen ( 1) will be displayed in the camera monitor,
followed by the print selection screen ( 2).
B
If the PictBridge Startup Screen is not Displayed
Turn the camera off and disconnect the USB cable. Set the Charge by computer option ( E 92) in
the camera’s setup menu to Off and reconnect the cable again.
12 / 12 15/11/2011
1 2