Tap i, Daylight saving time – COOLPIX by Nikon S100 User Manual

Page 41

Advertising
background image

23

Step 1 Turn the Camera On

B

a

si

c S
tep
s for S

h

oot

in

g

and Play

ba
ck

6

Tap I.

The clock is activated and the camera enters

shooting mode.

Daylight Saving Time

If daylight saving time is in effect, tap p in the
time zone selection screen displayed in step 3
to turn on the daylight saving time function.

When the daylight saving time function is
enabled, W is displayed at the top of the
monitor. To turn off the daylight saving time
function, tap p again.

C

Changing the Language or Date and Time Setting

You can change these settings using the Language and Time zone and date settings in the

setup menu (

A 88).

When the daylight saving time function is enabled in Time zone in Time zone and date in the

setup menu, the camera clock moves forward one hour, and when it is disabled, it moves back
one hour. When Travel destination (x) is selected, the local time is automatically calculated and
the shooting date and time of the selected region are recorded with the pictures.

If you exit without setting the date and time, O will blink when the shooting screen is displayed.

Use the Time zone and date setting in the setup menu to set the date and time.

C

The Clock Battery

The camera’s clock is powered by a backup battery that is separate from the camera’s main

battery. The backup battery charges when the main battery is inserted into the camera or when
the camera is connected to an optional AC adapter, and can provide several days of backup power
after about ten hours of charging.

If the camera’s backup battery becomes exhausted, the date and time setting screen is displayed

when the camera is turned on. Set the date and time again. See “Setting Display Language, Date
and Time”
(step 2,

A 22) for more information.

C

Imprinting the Shooting Date in Printed Pictures

Set the date and time before shooting.
You can permanently imprint the shooting date in pictures as they are taken by setting Print date

in the setup menu (

A 88).

You can use the ViewNX 2 software (A 76) to print the shooting date in pictures that were taken

without using the Print date option.

Date and time

DMY

15

11

2011

14 : 30

Home time zone

London
Casablanca

Advertising