Concord Camera Concord Eye-Q 4363z - Manual (Page 44)

42
En
TURNING THE BEEP SOUND ON OR OFF
The camera provides an option to enable or disable the beep sound. The beep sound is ON by default. While the
beep sound is on, the camera will beep in any of the following situations:
• When the camera is powered on.
• After an image is captured. (Note: The beep after image capture cannot be disabled.)
• When any button, except for the Power button, the zoom buttons and the camera mode slide switch button, is
pressed.
How to activate/deactivate the beep sound:
1. In the Setup menu, press or until Beep is highlighted.
2. Press to enter its submenu.
3. Press or to highlight the desired selection.
4. Press the OK button to set.
SETTING QUICK VIEW INTERVAL
The camera provides programmable Quick View duration, which is the time that the image is shown to the user
immediately after a picture is taken.
Quick View Description
Off No quick view, remain in live viewfinder.
1 sec (Default) Display image for 1 seconds then return to live viewfinder.
3 sec Display image for 3 seconds then return to live viewfinder.
5 sec Display image for 5 seconds then return to live viewfinder.
How to select Quick View time phrase:
1. In the Setup menu, press or until Quick View is highlighted.
2. Press to enter its submenu.
3. Press or to highlight the desired selection.
4. Press the OK button to set.
FORMAT
DATE/TIME SETUP
DIGITAL ZOOM
BEEP
QUICK VIEW
RETURN SELECT
SETUP
1
3
5
3
2
ON
OFF
RETURN SET
BEEP
OK
1
3
5
3
2
FORMAT
DATE/TIME SETUP
DIGITAL ZOOM
BEEP
QUICK VIEW
RETURN SELECT
SETUP
1
3
5
3
2
Off
1 Sec
3 Sec
5 Sec
RETURN SET
QUICK VIEW
OK
1
3
5
3
2
CUSTOMIZING THE CAMERA SETTINGS
DZ4363 UG(514338-02)-E 42 6/16/04, 10:20:41 AM