Creda M350E - Manual (Page 8)

Step 3 Press & hold in the “Cook Period” button, the display will read
0.00 with the cookpot symbol lit up.
Step 4 With the Cook Period button still held set the required Cook
Period using the “+” and “–” buttons.
Release the buttons and the timer display will revert to the time of day with
the Auto symbol "A" & Cookpot symbol remaining lit.
Step 5 Press and hold the" Stop Time" button.
The display will read the earliest possible stop time for the
cook period that you have set above.
Step 6 With the Stop Time button still held in, use the "+" and "-"
buttons to set the "Stop Time". i.e. The time you require the oven
to switch off.
Release all the buttons and the timer will revert back to the time
of day. The "A" symbol will remain lit to signify that an Auto
Cooking Programme has been set. The symbol will go out.
When the Auto Cook Programme starts the will then light up
again.
Step 7 Turn the oven control(s) to the required temperature, and if
necessary select the appropriate oven.
Oven Timer Operation
8
A
U
T
O
Minute
Minder Cook
Period
End
Time Manual
16 . 20
A
U
T
O
A
U
T
O
Minute
Minder Cook
Period
End
Time Manual
Cookpot Symbol
A
U
T
O
Minute
Minder Cook
Period
End
Time Manual
0 . 00
Minute
Minder Cook
Period
Stop
Time
14 . 20
A
A
A
Minute
Minder Cook
Period
Stop
Time
14 . 20
There are two Auto Cooking programmes that can be selected using your timer:-
a) To set the timer to switch the oven(s) On and Off automatically.
b) To set the timer to switch On immediately and OFF automatically after a set cook
period.
a) TO SET TIMER TO SWITCH THE OVEN(S) ON AND OFF AUTOMATICALLY.
Step 1 Check that the correct time of day is set, if not follow instructions for setting the time
of day.
Step 2 Place food onto the correct shelf position in the oven and close the oven door(s).