Installing line cards – Cisco 10008 User Manual
Page 18
Advertising
18
Figure 10
Connecting the Grounding Lug to the Chassis
Warning
Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground
conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that
suitable grounding is available. Statement 93
Step 3
Attach the grounding lug firmly to threaded holes at the bottom rear of the chassis using two M5 screws.
Step 4
Attach the grounding lug at the other end of the wire to an appropriate grounding point at your site.
Installing Line Cards
Install any line cards before you connect power. See the
for
complete installation instructions.
1
Threaded grounding holes (2)
132825
1
Advertising