Clarity Amplified Big Button Cordless Phone with Corded Digital Answering Machine E713CC - Manual (Page 22)

22
time information in the base CID. The number will be shown on the LCD when the
phone is ringing. If the number matches with one of the entries in your Private Directory,
the caller’s name stored in the private directory will be displayed with the number.
If the caller number is disabled to send caller information, “WITHHELD” will display.
If the caller number is not provided, “OUT OF AREA” will display.
If you’ve got new Caller Display records, the base will have “NEW X” on its display,
where X is the number of new calls.
View the CID
All unanswered calls are saved in calls log with the latest call putting at the top of the list.
When the CID is full, the oldest call will be replaced by a new call. The unanswered call
which has not been read is marked with <NEW> icon and the number of new calls is
shown at the top right of the screen.
1. Press <OK/MENU> and <UP/DOWN> to select Caller ID log.
2. Press <OK/MENU> twice to review the entries; display shows the most
recent entry.
3. Press <UP/DOWN> to review the list of entries.
Note:
In idle, you can press <DOWN> to see the most recent record in the missed CID
list directly.
4. Press <UP/DOWN> to scroll through the CID list.
Note:
The <NEW> icon will be displayed in the idle screen until all new calls have been
reviewed in the CID list.
Store a CID Number into the Directory
1. Follow steps from 1 to 3 in section View the CID.
2. Press <OK/MENU> to select the record to be stored; the record will now be
edited before being saved to your directory.
3. Display shows “Edit number”; key in the number using the digit keys (maximum 20
digits) OR press <OK/MENU> if no changes are needed. If you make any mistakes,
press <CLEAR/MUTE> to backspace a digit. Press <UP> or <DOWN> to
insert characters.
4. Press the <OK/MENU> button to confirm.
5. Display shows “Edit name”; key in the name using the digit keys (maximum 15 charac
ters). If you make any mistakes, press <CLEAR/MUTE> to backspace a character.
USING YOUR CORDED BASE