Clarity Amplified Big Button Cordless Phone with Corded Digital Answering Machine E713CC - Manual (Page 44)

44
To Store a Redial Number into the Directory
Follow the steps in the section under “Review the redial list entry” above.
1. Press <MENU/SELECT> twice, then use the keypad to edit the number
if necessary,
2. Press <MENU/SELECT> and use the keypad to enter the name
3. Press <MENU/SELECT> to save.
To Delete a Redial Number
Follow the steps in the section under “Review the redial list entry”.
While reviewing a number in the redial list, press <MUTE /X> to delete the selected
entry. A confirmation tone sounds.
Find the Handset
You can use the handset locator feature to find misplaced handsets.
To start the paging tone
Press <FIND> on the telephone base. All the registered handsets will ring, and the
** Paging** is flashing on handset screen.
To stop the paging tone
Press <TALK ON / FLASH>, <SPEAKER>, or any dial pad key (0-9 *, or #) on
the handset(s).
–OR–
Press <FIND> on the telephone base or put the handset in the telephone base
or charge.
Make an Internal Call
This feature is only applicable when there are at least two registered handsets. It allows
you to make internal calls, transfer external calls from one handset to another handset
and make conference calls.
Intercom Another Handset
1. In idle mode, press <MENU/SELECT>, then <UP/DOWN> to select Intercom.
2. Press <MENU/SELECT>:
If you have two handsets, your handset screen shows Calling other handset. The
other handset rings and its screen shows Other handset is calling.
USING YOUR CORDLESS HANDSET