CITIZEN CL-S700 - Manual (Page 30)

2
Printer Operation
30
6. Insert the end of the media in to the slot in the rewinder flange
and wind the media on to itself with two or three turns to ensure
it is held properly. Set the rewinder flange back in to the printer.
Rewinder paper guide
Rewinder flange
Setting the Media
5. Insert the tip of the media through the media enter slit from
the external side of rewinder cover.
4. Pull out approximately 80cm length of media from the head
unit.
Media
Approx. 80cm
Media enter slit