Conair MPA - Manual (Page 13)

UGH004/0999 microKool Portable Chillers
D
ESCRIPTION
2-5
Molded Plastic
Reservoirs
Large,thick-walled,
insulated polyethylene
reservoirs provide
corrosion-free operation.
Low-water level sensors,
external fill ports and level
indicators are standard.
Water Connections
All chilled water and con-
denser water connections
are welded to the struc-
ture. Every unit includes
bronze chilled water sup-
ply and return valves.
High Efficiency Compressors
All microKool chillers are equipped with quiet
Copeland hermetically sealed compressors. Hot-
gas bypass capacity control is standard, permit-
ting efficient operation with cooling loads as low
as 25% of rated chiller capacities.
Corrosion-Free Evaporators
On models through 7.5 Hp, chilled water flows through heavy
gauge tube-in-tube evaporators. The water comes in contact with
only copper surfaces, eliminating corrosion and scale build-up
that can severely reduce chiller efficiency. Low pressure drops,
averaging less than 2 psi, result in more flow to the process.
Performance-engineered condensers
Water-cooled models are equipped
with high efficiency, non-ferrous
tube-in-tube condensers and water
regulating valves. Air-cooled mod-
els have aluminum fin, copper tube
condensers. MPA models with
compressors above 1.5 Hp have
automatic fan cycling controls.
Control Extension
Controls can be extended
approximately 11 inches
from the control base.
F
EATURES
Water-cooled
unit shown