Signal selection, Video resolution and cable length, Identity code – Crestron electronic IM-RXV1-M User Manual

Page 17

Advertising
background image

Crestron IM-RXV1-M & IM-RXV3-M

iMedia Receiver with Video & Mic Input

Signal Selection

The RGB signal connected to the IM transmitter is delivered to the display device
(e.g., projector) via the RGBHV output of an IM receiver. The composite video
signal connected to the IM transmitter is delivered to the display device (e.g.,
projector) via the composite video output of an IM receiver. Each IM transmitter
possesses a SELECT button (IM transmitters with video have two SELECT
buttons) that activates an input. The receiver automatically routes the last activated
input to the RGB or composite video output and deactivates any prior selection. In
addition, the display's power and input selection commands can be controlled via the
IR or COM port.

Video Resolution and Cable Length

The receiver can accomplish frequency compensation on each input to achieve
correct operation. This compensation scheme is effective for CresCAT-IM cables as
long as the maximum skew of 15 ns per 100 meters is not exceeded.

NOTE: For proper operation and performance of every iMedia system, always use
CresCAT-IM cable.

Maximum Resolution and Cable Length

RESOLUTION REFRESH

RATE

(HZ)

PIXEL

RATE

(MHZ)

PIXEL

TIME (NS)

MAX

LENGTH

(FEET)

VGA

60

25.18

39.7

218.5

(640 X 480)

72

31.50

31.7

174.6

85

36.00

27.8

152.8

SVGA

56

36.00

27.8

152.8

(800 X 600)

72

50.00

20.0

110.0

85

56.25

17.8

97.8

XGA

60

65.00

15.4

84.6

(1024 X 768)

70

75.00

13.3

73.3

85

94.50

10.6

58.2

SXGA

60

108.00

9.3

50.9

(1280 X 1024)

75

135.00

7.4

40.7

85

157.50

6.3

34.9

UXGA

60

162.00

6.2

34.0

(1600 X 1200)

70

189.00

5.3

29.1

85

229.50

4.4

24.0

COMPOSITE
VIDEO

218.5

For more information on CresCAT and other wire products, visit the Crestron
website (

http://www.crestron.com/downloads/pdf/product_line_overviews/overview-

wire_and_cable.pdf

).

Identity Code

The IP ID is set within the IM-RXV1-M or IM-RXV3-M’s table using Crestron
Toolbox™. For information on setting an IP table, refer to the Crestron Toolbox help
file. The IP IDs of multiple IM-RXV1-M or IM-RXV3-M devices in the same
system must be unique.

Operations & Installation Guide – DOC. 6593A

iMedia Receiver: IM-RXV1-M & IM-RXV3-M

13

Advertising
This manual is related to the following products: