Harbor Freight Tools Model 97007 - Manual (Page 11)

Page 11 SKU 97007 For technical questions, please call 1-800-444-3353.
3. Push the Safety Catch forward and
hold the Safety Paddle Switch (3)
down to engage the bit.
4. If the tool requires more force to
accomplish the task, verify that the
tool receives sufficient, unobstructed
airflow (CFM) and increase the
pressure (PSI) output of the regulator
up to the maximum air pressure
rating of this tool.
caution! to pReVent tool
and acceSSoRy FailuRe,
ReSulting in injuRy:
do not exceed the tool’s maximum
air pressure rating of 90 pSi.
If the tool still does not have sufficient
force at maximum pressure and
sufficient airflow, then a larger tool
may be required.
5. To prevent accidents, turn off and de-
tach the air supply, safely discharge
any residual air pressure, and release
the Safety Paddle Switch and/or turn
the switch to its off position after use.
Clean external surfaces of the tool
with clean, dry cloth, and apply a thin
coat of tool oil. Then store the tool
indoors out of children’s reach.