Canon DR-2510M - Manual (Page 10)

Back Previous Page Next Page
Contents
10
„
Auto Color Detection
The scanner detects whether the scanned document is in color or black and
white, and saves the image accordingly.
„ Folio Scan
You can scan folded documents. The scanner will scan both sides and combine
the scanned images into a single image.
„ Deskew
The scanner straightens scanned images when it detects that the document was
placed askew.
„
Ultrasonic Double Feed Detection (for the DR-2510C/DR-2510M only)
Ultrasonic waves are used to detect pages that are fed at the same time as well
as the space between pages. Scanning stops if a double feed is detected.
„ Text Enhancement Modes
The scanner is equipped with the Advanced Text Enhancement Mode (only for
Windows), for enhancing the text of documents with dark or uneven
backgrounds, and the Advanced Text Enhancement II mode, for enhancing the
text when both the text and background are light.
These modes may not work, depending on the type of document.
„ Color Drop-out
The scanner is equipped with a Color Drop-out function that enables you to
specify a color for the scanner to omit from the scanned image. Both sides are
scanned, but saving the image is skipped for scan images judged to be from a
blank page.
„
Skip Blank Page Function
The scanner is equipped with a Skip Blank Page function that enables you to
scan a document without storing images of blank pages, regardless of whether
each page of the document is two-sided or one-sided.
„ Prescan Function
The scanner is equipped with a Prescan function that allows you to adjust the
contrast and brightness of a prescanned image and then send the adjusted
image to the application software, without needing to scan the document again.
„ Job Function
The scanner includes three job buttons for automatically scanning and
performing operations (up to ten operations, such as saving, printing, or
mailing, can be registered) on the scanned image.
„ Scan First
Pressing Job Button starts CaptureOnTouch. You can then perform a scan
simply by following the on-screen guidance.
„ Auto Start
The scanner is equipped with an auto start function, which enables scanning to
be automatically started when a document placed in the feeder is detected.
„
Sleep Mode
The scanner is designed to save energy by entering the sleep mode when it is
not scanning documents.
NOTE
Some functions may not be available depending on the software you are using.