COBY CV-M225 - Manual (Page 14)

Page 1 Coby Electronics Corporation
4. Pairing is unsuccessful.
If pairing has not succeeded after a few tries, you may need to
reset the headset before pairing.
To reset the headset:
With the headset turned off, press and hold the multi-func-
tion control (MFC) for about 8 seconds until the LED indicator
flashes red and blue, and then press and hold the MFC again
until the LED indicator light turns off. The headset has now
been reset.
5. Some headset functions do not work.
If you notice that you cannot make use of all of the features of
the headset, please check if your cellular phone has the right
software version.
Troubleshooting