COBY CV-M225 - Manual (Page 8)

Page  Coby Electronics Corporation
Using Your Headset
Activate the Bluetooth search function of the cellular
phone. The message “CV-M225” will appear in the
phone’s display when detected.
If necessary, enter the passkey “1234”.
If pairing is successful, the LED of the CV-M225 will flash
blue intermittently. The headset is now in standby mode.
You can abort pairing at any time by pressing and holding
the MFC for about 2 seconds until the red and blue LED
turns off. The headset is now turned off. Previous pairing
(if any) remains.
3.
4.
5.
6.