CDA SV 980 - Manual (Page 24)

24
1
2
1
2
After Cleaning, Replace the Inner Glass Pane
When replacing the inner glass pane, make sure that:
- you replace the pane correctly, as shown. The pane must be in the position described below in order to
fit into the door and to ensure that the oven operates safely and correctly
- you take extra care not to bump the edges of the glass against any object or surface
- you do not force the pane into place. If you are experiencing difficulties replacing the pane, remove it and
start the process again from the beginning. If this still does not help, call Customer Care
- check that you are holding the pane the correct way. You should be able to read the wording on it as it
faces you.
1. Insert the inner glass pane in the uppermost pair of grooves and push it slightly (arrow 1 in figure 11).
2. Gently lower into place (arrow 2 in figure 11).
Fig. 11