CDA SV 980 - Manual (Page 30)

30
OVEN DOOR
LOWER TRIM
AIR FLOW
IMPORTANT:
To avoid damage to the lower trim please note the following instructions.
The lower trim is designed to allow for good air circulation and the correct opening of the oven door.
To ensure the trim is not damaged due to the appliance being placed on the floor, the appliance should be
suitably supported as in below illustrations.
After installation the appliance door should be slowly opened to ensure no damage has occurred.
No responsibility for lower trim damage will be accepted if these instructions have not been
followed.
Air Flow
Oven Door
Lower Trim
Fig. 19