The icemaker – CDA FWV470 User Manual
Page 4
The Icemaker
Before first use:
1. Pull the machine out of its housing by lifting the handle of the machine and pulling it towards you.
2. Turn on the machine at the power switch on the left side of the machine The machine will automatically start a drain
cycle, which will take approximately five minutes. During this process, the display will show ICE OFF WATER EMPTY.
3. Push the machine back into the housing.
4. Switch on the machine by pressing the
button.
5 The machine is now ready for use and the display shows ICE ON WATER READY.
Please note
You should clean the pipes through before first use to remove any impurities in the system after installation. To do so,
place a jug under the water nozzle and press for approximately two minutes, disposing of the water dispensed.
3