CDA FWV470 - Manual (Page 7)

Troubleshooting
IMPORTANT:
Do not operate with a damaged cord or plug, after the appliance malfunctions or has been damaged in any way. You
should contact CDA Customer Care for inspection, repair or adjustment.
Problem Solution:
WATER MISSING shows in the display Check the water supply is connected and switched on
ICE FAULT WATER READY shows in the display
at first switch on
Turn the icemaker off with , and the main switch on the side, before
switching it on again.
The dispensed water has an unpleasant taste Ensure that only water pipes suitable for drinking water are used
ICE FAULT shows in the display Turn the icemaker off with remove some ice and turn it on again.
We recommend that the unit is not left on permanently.
6