Code Alarm CR3 - Manual (Page 53)

C002332_09_CR3 User Manual - 47 Save Settings
To fi nd out the Reader ID and fi rmware version, open a text editor program (i.e., Notepad, Microsoft
Word, etc.) and read the following code:
Reader ID and Firmware
Note: For units with a Bluetooth Radio, the Reader ID is also your Bluetooth Radio PIN #.
You will see a text string indicating your fi rmware version and CR3 ID number (see below):
Xap/iVVVVWWWWXXXXSSSSSSSSSSPXX-XX+XXX
Xap/i - Code Internal ID (not applicable)
VVVV is the application fi rmware version number
WWWW is the bootloader fi rmware version number
XXXX is the radio fi rmware version number
SSSSSSSSSS Reader’s serial number (ten digits)
P is “A” if running fi rmware is the application, “B” if BootLoader
XXX-XX+XX - Internal ID (not applicable)
Example:
Xap/i3000300006040010002363A06D-SD+SQ
Note: Code will periodically release new fi rmware for CR3 units. For information on latest fi rmware
versions, call Code at (801) 495-2200. To upgrade fi rmware, please visit our website at http://www.
codecorp.com/support/downloads.htm and follow instructions provided.
4.7 - Reader ID and Firmware Version
4.8 - Reader Settings Lock
To lock or unlock the current settings on your reader please scan the codes below:
Reader Settings Locked Reader Settings Unlocked
NOTE: Prefi x and Suffi x programming codes, memory transfer and delete commands, “Clear All
CodeXML Rules” and “Suffi x -Erase/None”commands are not locked by this feature.