HP C240 - Manual (Page 123)

105
Changing Your Workstation’s Hardware Configuration
Installing Storage Devices
Installing Storage Devices
This section describes how to install storage devices in your workstation.
Before installing a new storage device, perform the following procedures as
described earlier in this appendix:
• Checking the SCSI IDs
• Preparing your workstation
CAUTION: All storage devices are susceptible to mechanical and electrostatic shock. When
handling the devices, always wear the static-grounding wrist strap that came in the
storage device kit. Always handle the drive carefully.
NOTICE: Do not use SCSI ID 7 for any of your storage devices’ SCSI addresses. The
host SCSI controllers use SCSI ID 7.