Canon CXDI-55G - Manual (Page 21)

4. Operation
– 7 –
(1) Align the positioning marks.
Align the positioning mark on the
connector at the sensor unit side
with the positioning mark on the
connector at the power box side,
and insert the connectors while
turning them slightly to the left or
right.
(2) Push the connectors in by one
step.
Push them in until they click into
place.
(3) Push the connectors in by
another step.
Push them firmly in until they click
into place again to lock them
together.
To disconnect the sensor cable relay con-
nector:
Hold the grip parts of the connectors on
both sides, and pull the grip part on the
sensor unit side to release the lock. Now
pull the connectors to the left and right to
disconnect.
2 to 3 mm
Power box side Sensor unit side
Positioning
mark
Positioning
mark Locking latch
Grip part Grip part