Clarion DB135 - Manual (Page 7)

DB135
9
English
Preset Memory Function
Preset Memory Function can store up to 24 sta-
tions: 6 stations for each of FM1, FM2, FM3 and
AM.
Note:
• When the present memory function is used, all the
content of the memory will be erased.
Manual memory function
1) Press the BND button 4 , and select the
band you want to store in the memory.
2) Press the SRCH Up/Down button 8 then
select the station you want to store in the
memory.
3) Press and hold the Preset button % for 2
seconds or longer, then the station will be
stored in the memory.
Auto store function (Automatic Station Store)
1) Press the BND button 4 , then select the
band you want to store in the memory.
2) Press and hold the AS button 5 for 2 sec-
onds or longer, then the station at which the
reception is the strongest will be automatical-
ly stored in the memory.
Note:
• When the number of stations stored is less than 6, the
previous content of the memory for each direct button
will be retained.
Preset Scanning (Preset Station Scan)
When the PS button 5 is preset, the “SCN” will
indicated preset memory numbers and the sta-
tions are tuned in for 7 seconds each in the order
in which they were stored. Press the PS button
again to cancel the preset scanning mode.
CD Mode Operations
Loading a Disc
Insert a CD into the centre CD insertion slot with
the labeled side facing up, “LOAD” appears in
the display, the CD enters inito the slot and start
playing.
Notes:
• Do not put your hand, fingers, or foreign objects into
the CD insertion slot.
• If a CD has already been loaded, another CD cannot
be inserted. Do not insert another one forcefully.
• Discs not bearing the mark cannot be played
with the unit. CD-ROMs cannot be played.
• Some CDs recorded in CD-R/CD-RW mode may not
be usable.
Listening to the Disc already Inserted
Press the FNC button 6 to select the CD mode,
the CD will start playing.
Stopping (pausing) Playback
While the CD playing, pressing the Play/Pause
button
0 will stop the CD and “PAUSE” indicate.
Press the Play/Pause button 0 again to resume
playback.
Ejecting the CD
Press the Eject button 3 , then the CD will be
ejected.
Note:
• If the ejected CD is left as it is, it will be reloaded after
15 seconds.
Top Function
Press the TOP button 4 , then the CD will start
playing from the first song (track number 1).
Selecting Tracks (songs)
Press the SRCH Up/Down button 8 .
: Playback will start from the next track.
: Playback will start from the beginning of
the track currently playing. When this
button is pressed again, the CD will play
from the previous track.