Clarion M275 - Manual (Page 22)

23
English
M275
Troubleshooting
Problem Cause Measure
CD/MP3/WMA
No sound heard.
Sound skips or is noisy.
Sound is cut or skipped.
Noise is generated or
noise is mixed with
sound.
Sound is bad directly
after power is turned on.
Wrong filename.
MP3/WMA files are
absent in a disc.
Files are not recognized
as an MP3/WMA file.
File system is not
correct.
Disc is dirty.
Disc is heavily scratched
or warped.
MP3/WMA files are not
encoded properly.
Water droplets may form
on the internal lens.
File system is not
correct.
Write MP3/WMA files onto the disc properly.
Use MP3/WMA files encoded properly.
Use ISO9660 level 1, 2 or JOLIET or Romeo
file system.
Clean the disc with a soft cloth.
Replace with a disc with no scratches.
Use MP3/WMA files encoded properly.
Let dry for about 1 hour with the power on.
Use ISO9660 level 1, 2 or JOLIET or Romeo
file system.
10. ERROR DISPLAYS
This is a failure of CD deckʼs mechanism and
consult your store of purchase.
Replace with a non-scratched, non-warped-
disc.
Eject the disc then reload it properly.
ERROR 2
Error Display Cause Measure
A DISC is caught inside the CD
deck and is not ejected.
A DISC cannot be played due
to scratches,etc.
A DISC is loaded upside-down
inside the CD deck and does
not play.
CD/MP3/WMA
ERROR 3
ERROR 6