ZTE Grand X Plus - Manual (Page 173)

173
During SAR testing, this device is set to transmit at its highest
certified power level in all tested frequency bands, and placed in
positions that simulate RF exposure in usage against the head
with no separation, and near the body with the separation of 10
mm. Although the SAR is determined at the highest certified
power level, the actual SAR level of the device while operating
can be well below the maximum value. This is because the
phone is designed to operate at multiple power levels so as to
use only the power required to reach the network. In general, the
closer you are to a wireless base station antenna, the lower the
power output.
The exposure standard for wireless devices employs a unit of
measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6 W/kg, and 1.6 W/kg by
Industry Canada.
This device is compliance with SAR for general
population/uncontrolled exposure limits in ANSI/IEEE
C95.1-1992 and Canada RSS 102 and had been tested in
accordance with the measurement methods and procedures
specified in IEEE1528, and Canada RSS 102. This device has
been tested, and meets the FCC, IC RF exposure guidelines
when tested with the device directly contacted to the body.
The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. SAR information on this
model phone is on file with the FCC and can be found under the
Display Grant section of www.fcc.gov/oet/ea/fccid after searching
on FCC ID: SRQ-Z826.