Bowflex XTL - Manual (Page 7)

Folding & Moving Bowflex: Folding and
moving your Bowflex is easy. Follow the simple
steps below to fold your Bowflex. Once it’s
folded, simply tilt the machine back on it’s
transport wheels to roll the machine to any
location
•Bind the Power Rods ® with the rod
binding strap.
•Remove the threaded knob on the
platform.
•Tilt the bench up to the Power Rods ® .
•Link the two hooks on the end of the
cables together, over the top of the incline
support bracket on the bench.
•Slide hand grips over opposite bench
legs, crossing the cables to do so.
•Wrap the Leg Press Belt around Power
Rods ® and link hooks to D-rings on hand
grips.
Maintenance & Care Of Your Bowflex: Your
Bowflex requires very little maintenance. To
keep your Bowflex in top condition check all
fasteners and Rod Caps before each workout
and tighten as needed.
Clean the bench with a non abrasive cleaner
after each use. This will keep it looking new.
Any non abrasive household cleaner or soap
works well. Many automotive interior cleaners
make surfaces too “slick” and should not be
used.
If you have any questions regarding
maintenance please call our customer service
department at 1-800-269-3539.
Using Your
Machine
5