Zoom H4n - Manual (Page 42)

041
8-2 <MODE> screen: 4CH mode
• Explanation of the top screen
Displays the recording and playback level
corresponding to each input source.
[MIC] �����Input from either the built- in microphones
or an external stereo microphone
[IN] ��������Input from INPUT [1] and INPUT [2]
INPUT SOURCE and LEVEL METER
<MODE> scr
een: 4CH mode
Recording lapse and playback lapse:
Display: 00(time):00(minute):00(second):000(1/1000second)
Counter
File format during selecting,
recording and playback.
FILE FORMAT
Display of recorder’s condition
STOP
PLAY
▲
PAUSE
blink
REC
●
Recording Standby
blink
[REC] button
blinks
[REC] button
lights on
When the display of “Low Battery” is shown,
it is time to change battery.
REMAINING BATTERY LIFETIME during battery running
FILE NAMES during selecting, recording
and playback work.
If there is no file in any folder, the screen says ‘No
Data’.
FILE NAMES
Remaining recording capacity time on SD card.
REMAINING RECORDING TIME
CLIP METER
The clip meter light turns on when the recording
and playback level reach 0dB and remains lit until
the file ends or the stop button is pressed.
<PHANTOM> power source
48V/24V
P.032
<COMP/LIMIT> function P.069
<LO CUT> function P.068
<MS STEREO MATRIX> P.073
Indicator of option settings: ON or OFF
When each optional function is ON, display
says following: