Verykool i277 - Manual (Page 16)

n Delete to delete the current short message.
n Delete All to delete all the messages in “Outbox”
4.6.5 Sent messages
This mailbox store has send a message
4.6.6 Delete messages
Can be removed separately from Inbox, Outbox, Sent messages, drafts or all of the
information to delete all.
4.6.7 Broadcast message
In this menu you can use the broadcast message.
4.6.8 Templates
Text message
Click the “ok” to enter information template list, can edit or remove the template
message or Write Message.
Multimedia message
Click the "Ok" to enter information template list, can View it, Properties and Write
Message
4.6.9 Message settings
Text message
When using the short message function you must first make the necessary
settings.
Enter the “Message Settings” submenu to select the following operations:
n Profile Setting Please contact your network provider to get the SC
Address. Profile list have one profile, two profiles and four
profiles because the different network supports and SIM card.
Select one Profile, press the left soft key “Edit”, can set the
Profile Name, SC Address, Valid Period and Message Type.
During Valid Period, the short message service centre will
continuously resend a message until it is received. The message
Valid Period is applicable for all sent messages. You can set the
message Valid Period as any of the following: “1 hour”, “6
hours”, “12 hours”, “1 day”, “3 days”, “1 Week” or “maximum”.
The network operators must support this function for it to be
available. Message Type can select the Text, Fax, Page, E-mail by
the left/right keys.
Note: Message Validity Perid, Fax, Page and E-mail need support by the
network operator.
n Common Setting to set On/Off for the Delivery Report. If you set it as
“On”, when the recipient receives your short message, or if the
short message is not received for some reason, the short message
center will send a status report so that you can see whether the
message has been delivered.
Note: The network operator must support this function for it to be
available.
n Memory Status to display the memory by n/m form in the SIM card and
- 16 -