Concord Camera 4360Z - Manual (Page 9)

8
GETTING STARTED
En
Setting the Time
The time is displayed in hour, minute format.
1. Press to change the selection in the blinking position until you reach the desired setting.
2. Press to highlight the hour (HH), minutes (MM) or AM/PM.
• The selection will blink when it is highlighted.
3. Repeat steps 1 and 2 until the time is set.
4. Press to set the time.
Note:
The time can be displayed in a 12-hour or 24-hour format. Please go to page 31 to change this setting.
If the battery is removed or dead for more than 4 minutes, the time will return to its default setting.
TURNING THE LCD/ICONS ON AND OFF
LCD can be used to frame subjects for image and video clip capture, review stored images and video clips, and
display the current camera settings.
1. Use the ( ) button to toggle the LCD mode. The LCD mode changes each time the button is pressed.
Note: In order to save battery power, you may turn off the LCD display or LCD will automatically turn off
after one minute of inactivity.
ADJUST TIME
OK
01 :01 AM
RETURN
SET
ADJUST TIME
OK
01: 01 AM
RETURN
SET
01: 02 AM
RETURN
SET
ADJUST TIME
OK
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
07 ⁄ 04 ⁄ 03 02:40PM
4 M 28/45
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
Icons off LCD off LCD on with icons
DZ4360 UGuide-E(512883-01) 2003:11:17 5:22 PM Page 8