Keri Systems KE-8 - Manual (Page 3)

KE-8 Controller Enclosure
Installation Guide
Page 3 of 5 P/N: 01515-001 Rev. C
3.0 Controller Installation
Two Controllers can be installed in the body of the enclosure and two in the enclosure lid. Keep Controller wiring
requirements in mind as you install Controllers into the enclosure. Refer to Figures 2 and 3 for Controller mounting
locations.
Figure 2 - Controller Mounting in Enclosure Body
Enclosure
Lock Tabs
Lid
Hinge
Enclosure Body - TOP
Controller Mounting Locations