Keri Systems EntraGuard Bronze Residence Guide - Manual (Page 10)

EntraGuard Bronze
1530 Old Oakland Road, Suite 100 01911-003 Rev. C
San Jose, CA 95112 USA
(800) 260-5265 (408) 451-2520 FAX (408) 441-0309
Web: http://www.kerisys.com E-mail: [email protected]
Page 10 of 14
Residence Guide
Telephone Entry
ADD AN ENTRY CODE
An Entry Code allows a user
to activate a gate relay from
the EntraGuard Bronze unit.
• Press .
• Press – the desired entry code (see page 1 for
the four pre-programmed codes, the factory default is ”123”).
• Press . The unit emits a short high-pitched tone to
indicate the code has been accepted. A high-low tone is
emitted if an invalid programming code has been entered.
DELETE AN ENTRY
CODE
Deletes a users entry code.
• Press .
• Press – the entry code to be deleted.
• Press . The unit emits a short high-pitched tone to
indicate the code has been deleted. A high-low tone is
emitted if an invalid entry code has been entered.
DELETE ALL ENTRY
CODES
Deletes ALL user entry
codes.
• Press .
• Press . The unit emits a short high-pitched tone to
indicate all entry codes have been deleted. A high-low tone is
emitted if an invalid entry code has been entered.
RESET THE
ENTRAGUARD BRONZE
UNIT
Resets all programmable
values (except for the
programming entry code) to
the factory default value
a
• Press .
• Press . The unit emits a short high-pitched tone to
indicate the unit has been reset.
Programming Command Instructions