Keri Systems Doors.NET Quick Start - Manual (Page 11)

Part no. 01565-001 11 Version 1.0
•
For Keri MS Cards or 26-bit Wiegand with a non-zero facility codes, Make sure
that Calculate Internal Number is checked and select the appropriate Card type
in the dropdown field then enter the imprinted card number in the Imprint field
and the facility code in the Facility Code Field.
•
Set the status as Active
•
Click on Add Card
o Click on the Access Rights tab and select the desired Access Group(s).
o Card presentations should grant access now on any enrolled credential that was given
appropriate access.