Keri Systems Doors.NET Quick Start User Manual
Page 6
Part no. 01565-001
6
Version 1.0
•
Upgrade Firmware (if appropriate)
NOTE: When upgrading firmware, the Administrative Client must run on the computer that is
running the NXT Gateway service.
o
In the Hardware Setup tab, select the All tab and then select a controller on the tree.
o
Click on the Firmware Upgrade button, which will be present in the Selected Items
Toolbar ribbon.
o
Select the controller or controllers that need to be updated in the Available Controllers
list and then select a firmware file and click apply.
o
A progress bar will appear on the right side of the selected controller tracking the
progress of the firmware upgrade.
o
The Firmware Upgrade is complete once the progress bar for all selected controllers
reaches 100%.
•
Configure Controller Properties