KERN & SOHN TAB 20-3 User Manual
Page 10
Advertising
TAB-BA-e-1311
10
7.2 Operation
7.2.1 Weighing
Start balance by pressing
The balance shows for approx. 3 seconds
„HELLO“ in the display and then goes to „0.0“.
Now it is ready for operation.
If display does not show ”0“, press
.
Put on items to be weighed,
weighed value is displayed.
(Example)
If the material to be weighed is heavier than the
weighing range, the display will show
„OVER"
(=Overload).
Advertising