KERN & SOHN ABJ 320-4NM - Manual (Page 41)

ABS-N_ABJ-NM-BA-e-1312 41
11 Menu
To adapt the behaviour of the balance to your requirements, go to the menu. Usually
the default setting of the menu is such that you do not need to make any changes. If
you encounter special conditions of use, go to the menu in order to set your balance
according to your individual requirements.
Menu structure:
Menu designation Invoke menu Explanation
Main Menu Main menu
Calibration Menu Adjustment
Zero / tare Menu Set to zero/taring
Data Output Menu Data output
Unit setting Menu Weighing Units
11.1 Menu symbol
After invoking the menu, the menu symbol [ ] will appear. The arrangement
depends on the navigation in the menu.
Symbol arrangement Explanation
Arrangement filled inside Shows the current setting
Circular arch left/right Higher or lower menu level selectable
Circular arch top / bottom Further selectable menu settings