KERN & SOHN ABJ 320-4NM - Manual (Page 46)

46 ABS-N_ABJ-NM-BA -e-1312
11.5.1 Change password
Standard password (factory setting): „9999“
Call up menu
 In weighing mode press the MENU button twice
Select menu item
 Press the navigation buttons ( ) repeatedly until
„TOOLS“ is displayed.
 Confirm with PRINT
 Press the navigation buttons ( ) repeatedly
until „SYSTEM“ is displayed.
 Confirm with PRINT
 Press the navigation buttons ( ) repeatedly
until „PASS.WRD“ is displayed.
Change password

Confirm with TARE.
 Use the navigation keys ( ) to enter the currently set
password
see chpt. 3.1.1 „Numeric input“.
 Confirm with TARE. When „OK“ appears, the password
input has been correct, if „ERR N“ appears, it was
wrong. In this case repeat the input with the correct
password.
 Use the navigation keys ( ) to enter the new
password
„Numeric input“ see chpt. 3.1.1.
 Confirm with TARE.
 Confirm again with TARE (or discard by ON/OFF).
Return to weighing mode
 Press ON/OFF repeatedly or for 3 sec.