KERN & SOHN ABJ 320-4NM - Manual (Page 51)

ABS-N_ABJ-NM-BA-e-1312 51
12.3 Auto Tare function
1. Call up menu
 Press TARE for 3 sec. in weighing mode.

2. Select function
 Press the navigation buttons ( ) repeatedly
until „A.TARE“ is displayed. The current setting is marked
by the stability display ( ).
With stability display ( ) Function turned on
Without stability display ( ) Function switched off
3. Enable/disable function
 Press TARE
4. Return to weighing mode
 Press ON/OFF repeatedly or for 3 sec.