KERN & SOHN ABJ 320-4NM - Manual (Page 52)

52 ABS-N_ABJ-NM-BA -e-1312
12.4 Zero / tare timing change function
The zero / tare timing change function can be switched-on, when the „Auto
zero“ and the „Auto tare“ function are enabled.
1. Call up menu
 Press TARE for 3 sec. in weighing mode.

2. Select function
 Press the navigation buttons ( ) repeatedly
until „TARE.F“ is displayed.
 Confirm with PRINT. The current setting is marked by the
stability display ( ).
With stability display ( ) Function turned on
Without stability display ( ) Function switched off
3. Enable/disable function
 Press TARE
4. Return to weighing mode
 Press ON/OFF repeatedly or for 3 sec.